500 MILLION PARTS FROM 12000 MANUFACTURERS

DATASHEET SEARCH ENGINE

Top Results

Part Manufacturer Description Datasheet BUY
2106154-1 TE Connectivity (2106154-1) Assem, Jumper, Board to Board, Screw Dow visit TE Connectivity

dow corning RTV 738

Catalog Datasheet MFG & Type PDF Document Tags

RTV 738

Abstract: dow corning RTV 738 into #38 drill hole (2.6 mm) using RTV such as Dow Corning Silastic® 738; RTV not permitted within , .75 (19.1) CABLE SHIELD BONDED IN PLACE WITH RTV .105 (2.67) DIA .099 (2.51) RED + IN GRN + OUT .40 (10.2) NOMINAL NO RTV .100 (2.54) MINIMUM ENDEVCO Model 136 Three-Channel , , silicon, ceramic, Parylene C, and epoxy. Media in (-) measurand port is exposed to the above and RTV
Endevco
Original

SILASTIC 738

Abstract: 738 Dow Corning RTV, such as DOW CORNING Silastic® 738; RTV is not permitted within 0.10 inch (2.5 mm) of unit's face , DIA. (1.60/1.70) SILVER PLATED SHIELD PRESSURE VESSEL BONDED IN PLACE WITH RTV CASE The , 8534A suitable for use on small-scale models in wind tunnels. RED + IN NO RTV .10 MIN. (2.5
Endevco
Original

weigh scale calibration program

Abstract: endevco 8514 hole (1.78 mm) using an RTV, such as DOW CORNING Silastic® 738; RTV is not permitted within 0.10 inch , tunnels. RED + IN GRN + OUT NO RTV .10 MIN (2.5) BONDED IN PLACE WITH RTV .30 NOMINAL
Endevco
Original

8515C-15

Abstract: 30042 pad within 1% of reading accuracy. 11.Recommended mounting is .002 to .005 inch thickness of an RTV adhesive, such as Dow Corning Silastic® 738, or General Electric RTV 118. 12.Rigid mounting using , . 36 AWG solid S.P.C., Teflon® insulated 0.0004 cubic inches (0.0065 cc) RTV bond to flat surface
Endevco
Original

8515C-15

Abstract: 30042 pad accuracy. 10. Recommended mounting is .002 to .005 inch thickness of an 11. 12. 13. 14. RTV adhesive, such as Dow Corning Silastic® 738, or General Electric RTV 118. Rigid mounting using , (0.0065 cc) RTV bond to flat surface 0.08 gram (cable weighs 2.5 grams/meter) The pressure cavity of
Endevco
Original

endevco 226

Abstract: RTV 738 (2.6 mm) using an RTV such as DOW CORNING Silastic® 738; RTV not permitted within 0.10 inch (2.5 mm , (12.7) *Option X: 40°F to 140°F (5°C to 60°C) CASE CABLE SHIELD BONDED IN PLACE WITH RTV , ) NOMINAL NO RTV .100 (2.54) MINIMUM BONDED IN PLACE WITH RTV WHT - OUT RED + IN .105 (2.67 , (MILLIMETERS) .XXGRN + OUT = +/- .8) = +/- .03 (.X NOMINAL .XXX = +/- .010 (.XX = +/- .25) NO RTV .100 , , ceramic, Parylene C, and epoxy. Media in (-) measurand port is exposed to the above and RTV silicone
Endevco
Original

RTV 738

Abstract: endevco 136 cubic inches (0.0008 cc) Bond into #38 drill hole (2.6 mm) using an RTV such as DOW CORNING Silastic® 738; RTV not permitted within 0.10 inch (2.5 mm) of unit's face. 0.3 gram (cable weighs 3.6 grams , small-scale models in wind tunnels. CABLE SHIELD BONDED IN PLACE WITH RTV .105 (2.67) DIA .099 (2.51) RED + IN .40 (10.2) NOMINAL GRN + OUT NO RTV .100 (2.54) MINIMUM BLK - IN , port is exposed to the above and RTV silicone coating. For use in water or corrosive media, contact
Endevco
Original